Skip to content
LuxPlan
Free · no sign-up · works offline

Is this room bright enough? Answer with a number.

Measure the light where you are, save it with the spot and the time, and see what that brightness is good for.

Last reading

 

Measure now

A light meter that remembers

  • 01

    Measure

    Use the camera's exposure where the browser allows it, or type a value from any meter. Switch between lux and foot-candles.

  • 02

    Keep the reading

    Every reading is saved with a spot name and time, so you can compare rooms, hours and lamps later.

  • 03

    Know what it means

    Each value is matched with recommended levels for 41 situations — desk work, reading, kitchen, plants and more.

  • 04

    Yours alone

    No account and no upload. Readings stay in this browser, and you can export them as CSV or JSON at any time.

How it works

  1. 1

    Point the camera at the surface you care about — the desk, the page, the counter — or enter a value.

  2. 2

    Name the spot and save. The reading is kept with its time.

  3. 3

    Check the guide to see which tasks that brightness suits, and measure again after you change the lamp.

Try a number

Type a brightness to see which situations it suits.

Lux guide →

Frequently asked questions

What is LuxPlan?

LuxPlan is a free light meter and light log. It estimates the brightness where you are in lux, saves each reading with a spot name and time, and compares it with recommended lighting levels.

How many lux do I need for a desk?

Common indoor lighting practice recommends about 300–500 lux for desk and office work, and 500–750 lux for reading and studying. Detail work such as sewing needs 750–1,500 lux.

Can a phone camera measure lux?

A camera can estimate lux from its exposure settings (aperture, shutter time and ISO). On the web, only some browsers — mainly Chrome on Android — share those settings. Where they are not available you can enter a value by hand, or use the LuxPlan app.

How accurate is the reading?

Camera readings are estimates and vary by device and by where you point. They are good for comparing rooms and changes over time, not as a certified measurement. You can set a calibration factor if you have a reference meter.

Where are my readings stored?

Only in this browser. Nothing is uploaded and there is no account. Camera frames are analysed on your device and never saved or sent.

What is the difference between lux and foot-candles?

Both measure light arriving on a surface. Lux uses square metres and foot-candles use square feet: 1 foot-candle is about 10.76 lux.